wire binding operation

- Sep 03, 2018-

Operation of automatic bookbinding machine:

A, insert nylon tube into the feed port before binding.

B, connect the power of 220v/50hz, turn on the power switch, the power indicator light is on, and hot riveting can be done in about 6 minutes.

C. Move the workbench back and forth to meet the size requirements of the edge of the drill and binding. Press "drop" to move the bit down, close to the paper, release the key before the drill point touches the paper, check the proper position of the hole, fix the workbench with the locking pin of the workbench and press "reset" button to make it work. The drill is raised and reset.

D. Carefully inspect the drill hole to avoid metal and other foreign bodies. Binding documents should be smooth to avoid damage to the bit.

Binding operation:

A, remove the paper scraps in the drilling hole, so as not to damage the machine parts.


TEL: 0086 27 83607915

E-MAIL:  libiao0012@hotmail.com